Automobile brake pad manufacturers take everyone to understand how to self-check brake pads
Release time:
2021-07-19
We are also able to self-check the brake pads, so how to self-check the brake pads?Automotive brake pads manufacturersI will summarize the self-inspection method of automobile brake pads for everyone.
Method one: observe the thickness of brake pads
Under normal circumstances, the thickness of the new brake pads is about 1.5cm, and the thickness will gradually become thinner under our continuous "destruction. Experts suggest that when the thickness of the brake pads is only about 1/3 of the original thickness (about 0.5cm), the owner should increase the frequency of self-inspection and be ready to replace it at any time.
There will be a protruding mark on both sides of each brake pad. Under normal circumstances, the thickness of this mark is about two or three millimeters. Of course, this is also the limit for the replacement of the brake disc. Therefore, when the thickness of the brake pad is close to this mark, The owner must be ready to observe at any time. Without removing the tire, it is difficult to accurately observe with the naked eye, at present, many models will prompt the position of the instrument handbrake light when the brake pads are too thin, which is more convenient than self-inspection.
Method 2: Listen to the problem
When you hear the sound of "iron rubbing iron" when you lightly tap the brake (it may also be caused by the running-in of the brake pads at the beginning of installation), the brake pads must be replaced immediately. Because at this time, the limit marks on both sides of the brake pad have directly rubbed the brake disc, proving that the brake pad has exceeded the use limit. At this time, it may not be as simple as changing the brake pads. The brake discs should also be checked at the same time, because when the sound of "iron rubbing against the iron" occurs, in most cases, the brake discs have been worn out. If the sound cannot be eliminated after replacing the brake pads, The brake disc must also be replaced!
Method 3: Feel with your feet
It is your feet that interact with the brakes every day, and you should pay more attention to the "foot feeling" when driving ". When it is difficult to step on the brakes, it is likely that the brake pads have basically lost friction. There is no other choice but to replace the brake pads immediately.
The above is the self-inspection method of brake pads shared by automobile brake pad manufacturers.
For more information about automobile brake pad manufacturers, please visit official website: http://www.cnzhaoda.com/
Related News
After the car market cake attractive brand influence into the key
With the deepening of market reform, the competition
2019-04-12
Intelligent attack car into mobile terminal trend or acceleration
A few years ago, Google launched driverless technology
2019-04-12
Service Hotline
electronic picture album
Address: Chengxi Road, Zhaopingyang Xiacun, Tangxia Town, Rui 'an City, Wenzhou City, Zhejiang Province
Telephone:+86-577-65351849
Fax: 86-577-65351849
E-mail:835367905@QQ.com