Car brake pad manufacturers tell you how to run in brake pads
Release time:
2020-01-13
How do the brake pads run in? The following brake pad manufacturers will talk to you. After brake pad replacement
How is the running-in between the brake pads?Brake pad manufacturersJust talk to everyone. After the brake pads are replaced, if you feel that the brakes are soft, you must step on the brakes a few times to eliminate the gap between the brake pads and the brake disc. It needs to run in for 200 kilometers to achieve a good braking effect, and try to drive to a place with good road conditions and fewer cars to run in. The running-in method of the new brake pads is to use the split point brake as much as possible for braking, and do not use the sudden brake before the running-in is good. Accident prone. 1. Lightly step on the brakes and brake with medium force to reduce the vehicle speed to a speed of about 10-20 km/h. There is no need to keep an eye on the speedometer, just keep your eyes on the road and make sure you can notice the road conditions.
2. Release the brake and drive for a few kilometers to cool the brake pad temperature slightly. However, do not brake until the vehicle stops, otherwise the brake pad material is integrated into the brake disc, which will cause brake vibration.
3. Repeat at least 10 brake cycles
Through the introduction of the above brake pad manufacturers, everyone should know how to run in the brake pads!
For more information about automobile brake pad manufacturers, please visit official website: http://www.cnzhaoda.com/
Related News
After the car market cake attractive brand influence into the key
With the deepening of market reform, the competition
2019-04-12
Intelligent attack car into mobile terminal trend or acceleration
A few years ago, Google launched driverless technology
2019-04-12