Precautions for replacement and maintenance of automobile brake pad alarm circlip
Release time:
2020-03-13
Automobile brake pad alarm circlipHow to carry out maintenance during use? What are the precautions during maintenance? Let's take a look at the car brake pad alarm circlip manufacturers below! Most cars use the front disc and rear drum brake structure. Under normal circumstances, the front brake shoes wear relatively quickly, and the rear brake shoes are used for a relatively long time. In daily inspection and maintenance, the following aspects should be paid attention:
1. Under normal driving conditions, check the brake shoes every 5000 kilometers, not only check the remaining thickness, but also check the wear status of the shoes, whether the degree of wear on both sides is the same, whether the return is free, etc. The situation must be dealt with immediately.
2. The brake shoe is generally composed of two parts: iron lining and friction material. Do not wait for the friction material to wear out before replacing the shoe. For example, the front brake shoe of a Jetta car has a thickness of 14mm, and the replacement limit thickness is 7mm, including the thickness of the iron liner of more than 3mm and the thickness of the friction material of nearly 4mm. Some vehicles have a brake shoe alarm function. Once the wear limit is reached, the instrument will alarm to prompt the replacement of the shoe. The shoe that has reached the limit of use must be replaced. Even if it can be used for a period of time, it will reduce the braking effect and affect the safety of driving.
3. When replacing, replace the brake pads provided by the original spare parts. Only in this way can the braking effect between the brake pads and the brake disc be good and the wear is small.
4. When replacing the brake shoes, special tools must be used to push back the brake cylinder. It is not possible to press back with other crowbars, which will easily cause the brake caliper guide screw to bend and cause the brake pad to jam.
5. After replacing the brake shoe, be sure to step on the brakes to eliminate the gap between the shoe and the brake disc, causing the first foot to not brake, which is prone to accidents.
6. After the brake shoe is replaced, it needs to run in for 200 kilometers to achieve a good braking effect. The newly replaced shoe must be driven carefully.
Through the introduction of the above car brake pad alarm circlip manufacturer, everyone should know how to replace and repair the car brake pad alarm circlip!
For more information about car brake pad alarm circlip, please visit official website: http://www.cnzhaoda.com/
Related News
After the car market cake attractive brand influence into the key
With the deepening of market reform, the competition
2019-04-12
Intelligent attack car into mobile terminal trend or acceleration
A few years ago, Google launched driverless technology
2019-04-12
Service Hotline
electronic picture album
Address: Chengxi Road, Zhaopingyang Xiacun, Tangxia Town, Rui 'an City, Wenzhou City, Zhejiang Province
Telephone:+86-577-65351849
Fax: 86-577-65351849
E-mail:835367905@QQ.com